Bradley cabinet is not increasing temperature. (Heating element)Updated 22 days ago
- If your cabinet is not heating, there may be an issue with the heating element.
To check if the heating element is functioning, follow these steps:
1. Disconnect the long power cord from the generator and the short jumper cord that connects the generator to the cabinet.
2. Plug the long power cord directly into the back of the cabinet and then into your wall outlet, bypassing the generator.
3. Turn on the power and leave it connected for 5 to 10 minutes.
4. After that, open the cabinet door to see if the heating element is glowing red.
If the heating element is not glowing and there is no heat in the cabinet, it is likely faulty and will need to be replaced.
For further testing and replacement instructions, please refer to the attached PDF.